R0D.com

Can I find inner rods for sheers to fit inside an already installed curtain rod? I have nice curtains already installed on a nice curtain rod, but they need sheers.. and I dont want to make more holes in the wall, uninstall this rod and put in a double rod, so was wondering if anyone knows of anything out there which could just be hung on the existing rod and function as an inner rod, so I could put up sheer curtains on it? Thanks!

What inexpensive rod or rods would you recommend for a Shimano Sustain SA4000FE? I'm planning on getting the reel, but spending all that money on the reel, I can't really afford an expensive rod. It is going to be used mainly for bass fishing in rivers and ponds. Not exactly sure what size or weight I should get, but obviously a bigger size. I will probably get a nicer rod later on, but right now I'm looking for a rod not much more than $50, I will go a little over if you really recommend it.

How do you get a different fishing rod on Pet Society? I found out there are other different rods than my usual wooden rod. How do I get it?

How much is a vintage phillipson fly rod worth? I have acquired, from my great-uncle, an 8'6" Phillipson Deluxe fly rod. It is fiberglass. I haven't found much info at all on this model. But it's to my understanding that it is among the first fiberglass fly rods created. I think this rod is from the 1950s It came right after the bamboo era. I always see other various phillipson fly rods listed on ebay selling for hundreds. Is anyone familiar with these Phillipson fly rods? I know they are very reputable.

What is that rod behind the cockpit of piston-engined planes? I have noticed from pictures that there are sometimes rods behind the cockpits of piston-engined aircraft (A6Ms, Fw 190s, and MC.200s.) It seems that there is some kind of cable from the top of the rod to the yaw.

What is the purpose of a lightning rod attached to the roofline of a building? Ben Franklin and his devotees have been selling lightning rods for decades. Please tell me as to how a one inch stranded alluminum cable can safely conduct millions of amperes of current [in a lightning bolt] to a ground rod connected to a lightning rod fastened to the ridgeline of a standard frame dwelling? I maintain that it cannot! I maintain that the lightning rod is designed to { disperse, dispense, discharge, emanate, release, drain-off } static electrical charges to the overhead clouds, thereby equalizing the potential difference between storm clouds and the surface of the earth in a localized area. When this balance exists, there is much less chance of a discharge in both directions between earth and clouds. If you disagree, please state your case in this matter. I'll listen:

How do you find the kinetic energy of a thin rod? A thin uniform rod (mass = 0.96 kg) swings about an axis that passes through one end of the rod and is perpendicular to the plane of the swing. The rod swings with a period of 1.3 s and an angular amplitude of 6.7°. (a) What is the length of the rod? (a) What is the maximum kinetic energy of the rod as it swings?

How do I install a clothes rod in a closet that has a slanted ceiling on one end? I have 2 bedroom closets that each have a slanted ceiling on one end. As you look into the the clostet, the slant is on the left. I want to install a clothes rod in each, but on the left/slanted side, there isn't anything to screw the rod holder end into. What can be done on the left/slanted side of the closet, so I can screw the rod holder in?

A nylon rod carries a positive charge. Which end of a water molecule is attracted to the rod? Why are no water molecules repelled by the rod? A poly(ethene) rod may be given a negative charge when rubbed with a nylon cloth. Will the charge on the poly(ethene) rod attract or repel a thin stream of water?

What is the advantage of buying a shorter or longer fishing rod? I am looking into buying a new fishing rod and the two options are either a 5'10" rod or a longer 6'6" rod, i usually just fish the detroit river and i do many different styles from casting to trolling to jigging and pretty much anything that's working. but i would like to know what the advantages of getting the shorter rod would be and what the advantages of getting the longer rod would be, also please let me know any disadvantages either might have, they are the same brand same price same everything except for the length, both are even medium action. Thank you for helping me with this.

What are some things you should look for when buying a new rod IE Length, flexibility ect? So, if you're planning to buy a new spinning rod and the brands Daiwa, Shimano, Pfleuger, Quantum ect don't exist. They're all just brandless labeless rods. What are some features you look for on them, like ^ length, flexibility, guide size, grip material ect. All the rods are 2 piece with pre spooled reels.

How much is my pittsburgh steelers Rod Woodson game worn helmet worth? I have a 1994 Rod Woodson game worn helmet signed and in a case. How much is it worth? I've been thinking of selling it, but want to know how much to post it for?

How can i cast further using a 13ft Caorse fishing rod on commercial fisheries ? just bought a new rod after many years away from fishing. I am having trouble casting any real distance with it when float fishing. can cast fine with a feeder good direction and distance etc. i know my reel needs a little more line but is the problem or is the rod pants ?

What was Rod singing when he was walking up the stairs in his underwear in hot rod the movie? In the movie Hot Rod, Rod is walking up the stairs in his underwear with a laundry basket and is singing something, I was wondering if anyone could quote the song he was singing when he was go up the stairs. I need to quote it for my friend. Thanks Jen

How difficult is it to mount a rod for cutains? I purchased certain and a curtain rod, I've never hug curtains before. How difficult will this be?

How do you remove old guides from a rod? I'm trying to convert one of my old fishing rods into an ice fishing rod. I don't know how i could remove some fo the old broken guides. They seem to be cemented rock solid onto the rod. I want to put on new guides. I'd welcome any help. Thanks.

What would rod you recommend for coastal inshore fishing? I was considering getting an ugly stik tiger lite rod because i've heard they are rugged and affordable. I'm looking for rods in the $50-75 range. Are the tiger lites sensitive enough to detect bites or should I try to find a more sensitive rod? Any help or advice would be appreciated.

What is the rod thing on front bumper corner on a mitsubishi chariot/spacewagon ? On the mitsubishi chariot/spacewagon, near side corner bumper there is a retractable rod controled by a swith on dash as "pole". What is this and what does it do ?

How a positively charged insulating rod can be used to give a metal sphere a negative charge? how about a positive charge? And can that same rod be used to simultaneously give one sphere a positive charge and another sphere a negative charge without the rod having to be recharged.

why is there an anode rod in water heaters? a couple of days ago my dad removed the anode rod (or stink rod as we call it) because our water smelled so bad that we could'nt drink it w/o feeling sick. it smelled like rotten eggs and made the water taste like it too. well, we had only had the heater in for two months, but when we pulled out the rod, it was so black and gross looking it looked like it had been there for years! my questions are: 1. why are the rods used? 2. what is it made out of? my dad has been wondering about these very questions. also, does it hurt to remove the anode? our old heater never had one as far as we know and it lasted 13 yrs and the water tasted great.

How to calculate the mass of a rod with varying density? "A 3ft long rod has weight density that changes linearly from one end to the other. Suppose the density is 2lb/ft at the left end and 5lb/ft at the right end. Find the total weight of the rod." Would you just average out the density's and then integrate with respect to x? Something like 0S3(3/x)dx or is that the wrong approach?

Where can I find a tension rod strong enough to hold a chandelier? I need to find a tension rod strong enough to hold about 30 pounds of chandelier (because I am not able to drill into my apartment ceiling but there is an alcove in the celing that is 38 1/2 inches wide. Any recommendations for a really strong tension rod??? Thanks so much!

What do I use for a curtain rod in front of vertical blinds? My husband and I have a townhouse that we rented. It has sliding doors in the living room to get to the back 'yard', and they put vertical blinds in front of the sliding doors. We do not have a place to store them (our bed is a platform style, so there is no under the bed, and none of our closets are big enough to fit the blinds in there), so we want to leave them up, but cover it with curtains. I'd like to put the curtains in front of the blinds, but the rod would have to extend a good 5 or so inches from the wall. Is there any hardware I can use that would extend the rod connection pieces so I can hang the curtains in front? I'm going to hang the curtains above the blinds and in front, to completely hide them (we don't use that door much, so the curtains won't be fully opened, and I have a design in mind that will let light in, but hide the top of the vertical blinds). But I need to get the curtains in front. Any suggestions? That's what I meant by rod connection pieces...brackets. I just couldn't think of the word.

How to fix leaky rod holes in foundation? I have leaky rod holes in the basement (poured concrete foundation). The builders have not plugged some of the holes and now they are leaking whenever we have lots of rain or water on that side of the house (I live in a townhouse; between the houses, I managed to drain the gutters away from the foundation, but sometimes, when it is windy, the wind pushes the rain towards the house and then it starts leaking). I looked at some solutions like injection, but it quite expensive. A friend of mine fixed the same problem with some silicone in the holes. Any other solutions out there?

What would a glass rod submerged in vegetable oil look like? One of my teachers asked me this question. He told us to compare how a glass rod submerged in vegetable oil would look compared to how it looks when it is out of it and just in air. Also he told us to answer as if we were submerged in the vegetable oil ourselves, when looking at the glass rod in the vegetable oil.

How to determine when you are about to throw a piston rod? When you believe you have a decaying piston rod in a straight 4 engine, what are some signs that you might throw the rod soon? What RPM number is safe to stay under to reduce pressure on the rod?

My shower rod pulled out of the wall. How do I reinstall? Also, when the shower rod pulled out of the wall it left deep grooves where the screws slid against the wall. I need to know how to fix the grooves before I reinstall the shower rod.

What exactly is a cylinder rod and what does it do? So I just had a new clutch put in and at first it was very hard to shift from gear to gear but after 2 weeks or so it has become easier. The only problem now is that I can barely shift into reverse. I went back to the mechanic and he said that all I had to do is replace the cylinder rod and it will be much easier. Any Ideas?

How can I bend a rod for a bow window? Is there any way to curve a metal or plastic rod without hiring professionals? The curtain will be a pocket rod so the rod does not have to be pretty plus there will be a top valance covering it.

How do I change the passenger side inner tie rod on a 1993 Saturn SL2? Are there any special tools I might need, and what procedure do I follow? I've been trying to change this, along with the outer tie rod, but I can't get either one of them off. There is a large boot covering the far end of the inner tie rod, I can slide it back some, but I can't seem to get it off. Any suggestions would be great.

How would i charge an electroscope positive with a negatively charged rod? "You are given two electroscopes and a negatively charged rod. Use diagrams to help you explain how you would charge one electroscope positively and one negatively." It's obvious on how to charge it negatively simply by touching it, how about charging it positive?

What should the average cost to replace the right outer tire rod and and alignment? I have a 2002 Escort. My right outer tire rod needs replaced and I need an alignment. I was estimated at 190$ is that a reasonable price?

How do I install a curtain rod if the window is right next to an adjacent wall? I have a window where there is no wall spacing on the top or to the right of the window to install a bracket. Is installing a curtain rod possible in this scenario or is my only option is installing blinds?

What happens when a positively charged rod is held near a metal sphere? Metal sphere A is initially neutral. A positively charged rod is brought near, but not touching. Is A now positive, negative, or neutral? I would really appreciate anyone who can give me an answer and explain why it works that way!

How do I hang a clothes rod from the ceiling? I'm moving into a room without a closet and I need to create my own. I would like to suspend a rod from the ceiling by two wires, but I'm not sure how to go about it. What supports to use, how to make sure it supports enough weight, etc. Any ideas? An armoire, storage rack or anything else is NOT an option. I've seen it done, that's what I'm doing, please don't waste your time and mine with other suggestions.

What would happen if a large rod were to be shoved through the Earth? A friend and I are planning on writing a book about how two people bring about the end of the world. It involves a rod being shoved through the earth. I want to know how big it would have to be in order to cause damage. Perhaps, with the right magnetic charge it can screw with the elements making up the planet. Just give your thoughts.

what could cause a tie rod to make a thumping noise while driving? the car is a 95' ford escort. i thought it might have been a cv joint or something with the drive axles. it is pretty loud at highway speeds. the faster you go, the louder and faster the thumping gets. i took it to a shop and the mechanic said it was a tie rod and some kind of wheel bearing. he said they couldnt fix it and it probably isnt safe to drive. could i lose a wheel, from a tie rod? does anyone know what could be wrong with the tie rod and what kind of bearing he was talking about?

What type of pier fishing rod should I get? I have some fishing experience and I want to fish of an ocean peir. What type of rod/reel combo should I get, and any specific models?

What is the best baitcasting rod and reel combo for under $35? I wanna bass fish but need a better combo. I might even just get a nice reel for $30 because i have an extra rod. Thanks.

If one inner tie rod needs replacement, should I replace both at the same time? Or any other related parts? I have a 1997 Honda CR-V, and I've been told that I should replace my right inner tie rod. Is there any good reason to replace the inner tie rod on the other side at the same time? Or might that one still last for a long time? If there is anything else that I should do at the same time, I'd appreciate that info too. (For example, if there would be significant labor overlap on the jobs.) Thanks!

How do i find how fast the bottom of a rod is moving? A rod of mass M=2kg and length L=2m is attached to the ceiling, it is pulled up so that it makes a 90 degree angle w/ the vertical and released from rest. How fast is the bottom of the rod moving as it passes the vertical?

What color and size perm rod should i use? I have brown hair that is a little above my shoulders. I wanna add some wave or curl to it. I cant decide between using a pink, white, or gray rod. Im definately getting a perm so dont say that i shouldnt get one.

What is it called When Rod Serling Addressed the Audience Directly? There is a word or a term for when Rod Serling stopped the action in his teleplays to address the audience in the beginning of each Twilight Episode. What is that word or term?

How much would it cost to get a rod fixed on a 97 Ford Explorer? I believe a rod blew out of my 97 ford explorer, about how much would it cost to have it replaced?

How should I hang a curtain rod on plaster wall? The walls are WW2 era plaster. The curtain rod and curtains will probably weigh about 10 lbs. They sent me screws and plastic anchors but I don't know if that is enough. Thanks.

How can you extend the length of a curtain rod by just a few inches? I have a tension curtain rod that expands up to 144" and is about 2" in diameter. The area I need to use it for (my loft) is around 150". Can I add something to the end of the rod to make it longer?

How hard is it to change a tie-rod end at home on a rear wheel drive family sedan? It is on a 1996 Holden VS Commodore. I have my own tools but nothing specific to tie rod ends. I know that once it is changed it will need a wheel alignment immediately; but I just want to know how difficult is it to change the ends at home?

Where can I find a shower curtain rod that holds both the shower curtain and the valance? I have a liner on one rod to go back and forth, but I can't find a rod to put the decorative curtain and valance on. The curtain has holes for hooks while the valance needs to slip over the rod.

What is the purpose behind a guide rod modification on a hand gun? What are the benefits of replacing the guide rod with a stainless steel one or say a titanium rod?? I just read about all these guys changing out the rod and getting trigger jobs done. thanks.

How do I remove tack welds from a metal rod? My car driver's seat is automatic and has a metal assembly that lifts the car up-and-down or moves it back-and-forward. There are two metal rods underneath, and the front one somehow snapped. It looks like I can replace the rod; however, it is held in place by about 4-6 tack welds. Is there a way to manually remove the tack welds so that I do not have to completely removed the assembly from my seat? Also, what kind of tool would I need to remove the tack welds?

How do I make metal shower curtain hooks slide better on a metal rod? I have both the shower hooks and the rod in a satin nickel finish and the hooks don't slide smoothly on the rod. Is there something I can put on the rod to help?

How to deal with rust on a rotisserie rod and vegetable basket? Any ideas of what I can do to salvage an expensive rotisserie rod and veg basket that was left out in the damp? Thank you. If you know, please include what I should do once the rust is off - do I need to treat the metal somehow?

where can you get a curved rod for a corner that looks sleek, for a personal dressing room? for my room i am wanting a person al fitting room in the corner of my room but im looking for one's that more curved than the cresent shaped ones. it's extrememly hard to find the one that i'm looking for but some stores use them but i have no idea where in teh world they even get them! can you please help me find one? like a shower rod but it will be used as a fitting room rod instead!

How does end A of the rod react when the charged ball approaches it after a great many previous contacts with? How does end A of the rod react when the charged ball approaches it after a great many previous contacts with end A? Assume that the phrase "a great many" means that the total charge on the rod dominates any charge movement induced by the near presence of the charged ball. It is strongly repelled. It is strongly attracted. It is weakly attracted. It is weakly repelled. It is neither attracted nor repelled.

How do I create a way to weight the grip of a rod I'm using to practice lightsaber technique? I'm trying to practice lightsaber techniques with a dowel rod that I cut down, but it doesn't have the proper weight in the grip of it to balance correctly. How could I create a weighting for it? I'm pretty sure the rod is one inch in diameter. Also, do you know of any good sites for lightsaber technique other than Youtube? It's not hollow - it's solid wood.

How many electrons are transferred from the wool shirt to the plastic rod? A plastic rod is rubbed against a wool shirt, thereby acquiring a charge of -4.9x10^-6 C. How many electrons are transferred from the wool shirt to the plastic rod?

What is the proper outside diameter for a rod being threaded with an M5 die? Please give the ideal size and tolerance for the O.D. of the rod in millimeters or inches. The rod being threaded is brass and I have an M5x0.8 die.

What can I put on my Shower Curtain rod to make my rings slide smoother? My shower curtain rings don't slide very good on my shower curtain rod. Besides getting a new rod, is there something I can do to make it easier for my rings to slide?

How do you remove and replace the plastic gliders inside a traverse rod? I have a permanent traverse rod attached to cement ceiling in my apartment and the old plastic gliders are breaking off. Need to replace them and I can't seem to remove some of the old ones. So how could I get old ones removed and replaced with new gliders without having major work done on cement ceiling for replacement of a new rod. Any help would be great!

How do you determine the thread size needed to thread a steal rod and tap the female mate? I have a steel rod measuring 7/16 (.4375 inch o.d.) I need to be able to thread into part. the die for a 7/16 thread is giving me trouble. As far as I know the rod is standard carbon steel and is soft enough to scribe and/ or grind but I can't get the the threads to start. I am new to tap and die and might be over looking something simple. I hope so and that someone can help. Thanks for any useful info.

How to calculate the center of mass of a bended rod? Consider there is a thin, uniform rod of length L. When the rod is straight, its center of mass is at its center. Now bend the rod in a circular arc so that it subtends an angle of 90.0 degree at the center of the arc. How far outside the rod is the centre of mass? What will center of mass of y be?

How to replace tie rod ends on a 1996 Ford Windstar? I need to replace the tie rod ends on my 1996 Ford Windstar GL mini-van. Is there anyone who might know of a online site that might give me the step by step procedure of how to do this project. I'm aware of the fact that the van will have to get an alignment afterwards, but I still need to know how to do the tie rod ends.

What is the best rod and reel combo? I'm looking for a open face rod and reel combo. Ideally I'd like something with at least a 3 ball bearing reel that will serve 8 to 12lb test line. Medium action rod. Or do you have any other sugestions. I mostly fish onshore. I've been to Bass Pro Shop but its overwelming with to many distractions.

Where can I buy a glass rod on the intenet that has a 2 inch diameter and is pyrex? I need a pyrex glass rod for a glass crafter friend of a friend I have looked and am having a hard time finding what he needs. I need it to be 2 inchers in diameter and ithas to be made of pyrex to make what I am wanting him to make for me. Anyone know a site that would carry this type of rod all I can find is for bead making?

How do I install a curtain rod that will hide a floor to ceiling bookcase? I'm moving into a smaller apartment and I'm trying to be creative about storage space.My solution is to use a cheap bookcase from my parent's garage and cover it with a curtain. I figure that I can hang the curtain rod from the 8" ceiling but my challenge is how to cover the 24" sides. I basically need a rod that is shaped like |_________|. Do they make that?

Help me find the initial acceleration of two particles on a rod? Two particles(A and B) each of mass 10kg are attached to a massless rod on each on opposite ends of the rod. The rod is placed horizontally on a fulcrum. Particle A is 10 cm away from the fulcrum. And particle B is 70cm away from the fulcrum. The rod is now released. What is the magnitude of the initial acceleration of particles A and B?

What are the long term effects of a broken arm having a steel rod put in? My stepson broke his arm while we were out of town and he was with his mother. He had a clean break on the small bone in his right arm. She told us they had to put a rod in his arm, and that he would have to have surgery again, but that is all she knows. Can anyone tell me what the second surgery may be and what the rod is doing in there in the first place? Thanks!

How long does it take to replace inner tie rod on 1992 dodge caravan? I need to replace the INNER tie rod on my 1992 dodge caravan, how long should it take? I want to make sure I am being given an accurate quote for labor time?

Can a harrington rod fused to the end of your spine cause erectile dysfunction? I also have a heart problem and don't want to mess with viagra but I don't want to HAVE to be alone because of this. I'm just not a "consistant performer" shall we say? My docs all say it's too dangerous at this point to remove the rod and I've had two back surgeries because they screwed up the first one. SO options?Are there safe alternatives to viagra that I can take or do I just hang it up now?

Is the titanium rod used is hip replacements worth a lot of money? I've heard that when some people die, they actually take the titanium rod out and sell it for 25000+! Is there any truth to that?

What size grommets should I buy to make my rod pocket curtains into grommet top panel curtains? I posted this question ealier-Where can I find someone to turn my rod top panel curtains into grommet top panels? I was told that I can do this myslef so my next question is: WHAT SIZE GROMMETS SHOULD I PURCHASE? I have 10 panels and each panel is 100% sailcloth cotton and is 42x95 Thanks for the help!

What should be a proper strength of the of the line and rod when catching fish? How many pounds should the line and rod be able to take to catch the kinda fish that you would find in like those neighborhood lakes? Catfish mainly.

How do I attach a heavy curtain rod to drywall? The part of the curtain rod that attaches to the wall keeps pulling out of the wall even though I'm using those plastic screw in plus, and then drilling the screw into that. Is there someting better? Does the screw have to be a certain length, although its the plug thats pulling out not the screw? Are the metal plugs that you hammer in better? FYI, there is not a stud where I need to put the plug.

Is there a way I can take apart my 2 piece fishing rod without taking my float off? I lose tension on the line and create a rats nest. The float and weight are a bit of a pain to take off and I am planning on going hiking and would like to attach the rod to the side of my pack. Is there a trick to taking the rod apart without taking off all my handiwork?

What types of fishing can i do with my new rod and reel combo? i have the ugly stick catfish, bait-caster rod and reel combo.the rod is a medium to heavy action pole. what type of fishing can i do with this rod and reel besides cat-fishing?

What is the difference to ball joints and tire rod and how do you know which one needs is broken? My leaned in and I am unable to drive it. I was told that I need to have my ball joints replaced and now I think my tire rod has broken.

How does a metal rod make a high pitched sound? My teacher put some powder on his hands for friction to rub a metal rod, and it made a high pitched sound. Can someone explain scientifically how he did it?

What is the best rod and reel brands to buy for fresh water fishing? I have not been fishing in about 10 years and want to get back into it. It has been so long and tomorrow I am going to the swap meet and they have lot of selections to buy there. What is a quality rod and reel brand name I can look out for while I am there?

What model shimano rod should i pair with a shimano curado 200 E7 baitcast reel? I want to buy a Shimano curado 200 E7 reel and i want to pair it with a shimano rod like a crucial or cumara which model crucial or cumara would pair the best with the curado 200 E7 reel. I would like the rod to handle diffrent kinds of bait because i dont want to have 15 rods and reels.

How to fix detached lift rod in bathroom sink? The lift rod on my bathroom sink doesn't pull the sink stopper down into the drain when I lift it up. In fact I can pull the lift rod right out. How do I get it reattached to the sink stopper so that it works properly?

Is there a way to hang a curtain without a rod? I heard that there was a way to hang a curtain, or there was some type of curtain that you could buy where you use little metal hanging clips and attach them to a pole for them to slide onto (or something like that). But there is no rod being used. Does anyone know what I am talking about or what the name of this type of curtain mechanism is?

How does a metal rod make a high pitched sound? My teacher put some powder on his hands for friction to rub a metal rod, and it made a high pitched sound. Can someone explain scientifically how he did it?

Will an ocean fishing rod with a maximum limit of 14 pounds be able to support a 25 pound line? I recently bought an ocean fishing rod that said maximum limit of 14 pounds. However, I need one that can support 25 pounds. The man at the store told me that this one would easily work with 25... However I don't know which one to trust. Answers? I meant line by the way, not fish size.

What is a good rod and reel setup for tarpon fishing? I am looking to buy a rod and reel that would be good for tarpon fishing. Also, what would be good line to use, how many lb test, and what kind of leader.

How could i rig the clarkspoons for spanish macks on my fishing rod? I want to try to use the clarkspoons but they are very light and for trolling. How could i rig them so i can use them on my rod.

What kind of spinning rod do you recommend? I live in mid Michigan and I like to fish anything from walleye, bass, pike, to catfish, and salmon but I am debating whether to get a medium rod or medium heavy. It's either between St.Croix, Berkley or Gander Mtn.

How much should it cost to repair the tie rod on my 04 Dodge Neon? I need to have it done to pass inspection. My mechanic said that overall it would cost $200. Is this accurate? He also said he would need to fix my alignment afterward as a result of replacing the tie rod. Is this necessary?

Can i fix a tension rod when i (accidentally) pulled out the spring? I feel really silly, but I had no idea how to use a tension rod. So i pulled the screw out completely and then I took the spring out, so now it has no tension! Can i fix this??? i forgot where the spring and the screw go, is there a picture out there?

what are their speeds as the rod swings through a vertical position? A wooden rod of negligible mass and length 88.0 cm is pivoted about a horizontal axis through its center. A white rat with mass 0.700 kg clings to one end of the stick, and a mouse with mass 0.300 kg clings to the other end. The system is released from rest with the rod horizontal. If the animals can manage to hold on, what are their speeds as the rod swings through a vertical position?

How many fish can you catch before your rod wears down? I have had a rod and reel for almost 10 years and it's acting really weird.

Getting extendable drape rod to not move? I just bought a good quality extendable curtain rod for my window. I placed the brackets and put everything up. The problem is when I open the curtains the rod moves and that causes the rod to essentially fall apart in the middle. How do I go about fixing this...any experience in making these work well?

What is a good fly rod brand for one who has taken 5 lessons and wants to seriously pursue the sport more? Also, what type of line weight and rod size is good for a river?

how do i put a shower rod up against glass and make it sturdy? i know its weird but our bathtub is surrounded by glass. we havent had a shower in my house for years. it makes me not want to get clean. i just wish i had a shower. i remember my mom tried to put up a rod once which worked for a little while and then fell down. any ideas?

How can I attach a stainless steel rod ( at the cross section) to the surface of a stainless steel sheet? The rod diameter is about 1cm and it's length is around 40cm. I need the joint to be electrically insulated, so welding is not useful.

How do stronger connecting rod bolts reduce chance of spun bearing? How would stronger connecting rod bolts or connecting rods reduce the chance of a spun bearing? And what is a spun bearing?

Does anyone know how to remove Outer Tie Rod end from a 1995 Dodge Caravan? I can not figure out how to take outer tie rod off. It has my brain hurting. Don't have the money to take it somewhere, I am trying to fix it myself. I have the ability to do it, I just can't figure this one out.

How do you take the inner tie rod off a 1990 240sx? Its snapped where it connects to the outer tie rod, but i have no clue on how to take the inner tie rod off to see if i did any damage to the rack. Please help? =)

What is an ideal height of lightning arrestor rod if i want to protect the DG? I want to know what is the ideal height for lightning arrestor. Does this height depend on the KVA rating of the equipment to be protected? What should be the size of the rod for lightning arrestor?

What happens if you lose weight with a rod in your leg? I broke my leg a couple years ago. The doctor placed a rod and a couple bolts into my leg. I am losing weight. How will that affect the rod in my leg?

What is the best casting rod for steelhead and salmon? I live in Washington and need to pick up a casting rod for steelhead this winter. I bought a nice Shimano Tekota reel, the 500LC. I'll be using it out on my drift boat mainly.

what type of curtain rod should I use? I was wondering what type of rod to use with a valance. I'm getting this for my dining room, and I am going to do sheers with a valance should I get a decrotive rod or a valance rod

Can mold or mildew grow on a shower rod? on my shower rod i saw these little black spots on the back of the rod i,m not sure if its rust of mildew. How can you know for sure what it is.

How do I install a curtain rod? Where, in relation to the window, do I install the curtain rod? Should it be level with the top of the window, or higher? If so, how much higher than the window should the rod be? I forgot to ask how long they should be. I believe the length should just graze the floor and not "pool" on the floor. Is this correct? The curtains are very long and can be hemmed to the appropriate length. This is for the living room.

How do I dress up a simple shelf and a rod to hang clothes on? Our apartment is older and in two of the bedrooms (both of my kids, one boy and one girl) there are no closets, just a clothes hanging rod and a shelf above it. How could I dress it up so it looks a little more like a closet or atleast less like a clutter and more decorative? The rooms look cute until you look at that and it just looks half-you-know-what! The boys room is a jungle theme and he is a baby so has lots of stuff to store. The girls room is a princess theme and it's all in mostly pink. By the way, I'm on a budget! I can't paint, since we rent. I can't do anything that will be permanent. It's one simple wooden shelf hung over one simple clothes rod.

What is the correct method of installing fishing line through the rod guides, inside the reel? I just bought a zebco fishing rod, but the line was tangled inside, so I took the line out, untangled it, and now I don't know how it gets wound around the guides before it gets threaded through the hole in the notched metal cap before going outside to the pole. Can you help?? I hae never done this before, if you can find one a diagram or video would work great. Tahnks!

How does a 1998 Ford F150 just lose a rod bearing out of the blue ?How much would it cost to fix? I was driving then the engine started knocking so i jus t stopped driving and called one my friends he's a mechanic he told me the truck had lost a rod bearing. The truck has 148,000 miles. How much would it cost to just fix the rod bearing since i had just installed a new motor about 35000 miles ago?

How to change the hot rod in the dishwasher? The rod in my dishwasher is getting real nasty looking. It's rotting and needs to be replaced.It's a frigidaire. Please help.Thanks...

Electrician, is it okay to use a ground that is tap or splice from the main ground wire connected to rod? Calling all electricain, I wanted to know if it's perfectly safe to use a ground that is tap or splice from main ground wire connected to rod outside your home? Or could I simply connect another ground wire to the existing rod & have two wire coming from one rod? Or would I have to install new entirely ground rod, which could get a bit pricey?

How to install a spring tension rod? I have an oval spring tension rod with a pole that comes out of one side and about a 2 inch loose spring inside the pole. How in the world do i put this up?

Need a pivot shower/curtain rod that can be hung from ceiling. Where can I find one? I have double shower that is 93" wide. I don't want to drill holes in the tile to hang a rod - can I get a pivot rod to hang from ceiling and make each shower panel 45-50" wide. I want to hang the pivot rod from the ceiling. Any help?

Why do the hairs on my arm stand up when i bring a charged electrostatic rod near it? Is it because a) the hairs on my arm is negatively charged and the rod is postively charged so they attract each other so the hair reaches out to the rod. b) the hairs become charged so they try to get as far away from each other as possible. I'm confused. Thanks!

Can i buy a really long curtain rod? is there a such thing as a long rod to hang curtains from to cover a long wall? I know there are ones that have the springs in them that expand, but they only go so far...i need one to cover a basement wall.

What is a good tip for keeping straight panel drapes gathered on the rod? They keep sliding to the middle of the rod, and I want them to stay back, for full view out the window. I don't want tiebacks; I want them to stay straight panels. Like tape or something?? but I don't necessarily want to tape by brand new drapes. But duct tape will show from outside :( Never mind: Train with a CLOTHES PIN for 2-3 days.

What is the difference between tie rods and tie rod ends? Can I buy a kit that includes everything, the inners and outers with the ends or are tie rods and tie rod ends one of the same

Where can I buy decorative curtain rod brackets? I made my own decorative poles and plan do use ring hooks. I just need the curtain rod brackets. Home Depot and Lowe's just have rod and bracket kits. I need ones that will hold 3/4 inch and 1/2 inch rods. thanks!